Electric brake controller installation — Sandgate
Electric Brake Controllers Brisbane
Electric brake controller installation and setup for tow vehicles, planned around your caravan braking system, wiring and towing requirements.
Consistent trailer braking starts with the setup
The Controller Needs to Match the Vehicle, Caravan and Driving Conditions
An electric brake controller sends a braking signal from the tow vehicle to the caravan brakes. The installation, wiring, controller type and adjustment all affect how smoothly and predictably the caravan brakes.
Proportional Control
Proportional controllers aim to apply trailer braking in relation to the tow vehicle’s braking effort.
Correct Wiring
Power, earth, brake-light signal and trailer brake output need to be installed correctly for reliable operation.
Manual Override
A controller’s manual function can allow the driver to apply caravan braking independently where appropriate.
Gain Adjustment
Brake output may need adjustment for caravan load, road conditions and braking response.
Vehicle Compatibility
Modern vehicle electronics, dashboards and factory towing systems can affect installation requirements.
Caravan Brake Condition
A controller cannot compensate for poorly adjusted, worn or faulty caravan brakes.
Brake controller and caravan brakes work together
Good Controller Setup Depends on Good Caravan Brakes
If the caravan brakes are out of adjustment, magnets are worn or wiring has excessive resistance, changing the controller setting may only mask the underlying problem.
Where braking performance is inconsistent, we can discuss both the tow-vehicle controller and the caravan-side brake system.
A clear installation process
How Electric Brake Controller Installation Works
Confirm the Vehicle & Caravan
We review the tow vehicle, caravan brake system and any existing towing or electrical equipment.
Select the Installation Approach
We confirm controller compatibility, mounting or control location and wiring requirements.
Install & Integrate
The controller and required wiring are installed and connected into the towing system.
Test & Explain Adjustment
Relevant functions are checked and we explain the basic adjustment process for the fitted controller.
What We May Need to Check
- Vehicle make, model and year
- Existing towbar and trailer plug
- Factory towing package or vehicle electronics
- Caravan brake type and axle configuration
- Controller compatibility
- Suitable mounting or control location
- Power, earth and brake-signal wiring
- Trailer brake output circuit
- Existing auxiliary wiring or charging circuits
- Condition of caravan brakes if braking performance is poor
Why Choose AllBrand for Electric Brake Controllers?
Vehicle & Caravan Perspective
We consider the tow-vehicle controller and caravan braking system together.
Auto Electrical Capability
Brake-controller wiring can be integrated with trailer plugs, charging circuits and other towing electrical work.
Multiple Trades Under One Roof
Mechanical, electrical and caravan work can be coordinated where braking issues cross systems.
Established Brisbane Business
AllBrand is part of McArthur Industries, serving Brisbane since 1973.
Setup Before Guesswork
We focus on installation and system condition rather than simply increasing controller gain to compensate for a fault.
Convenient Sandgate Workshop
We assist customers from Brisbane Northside, Moreton Bay and surrounding areas.
Brisbane Northside
Electric Brake Controller Installation in Sandgate
AllBrand Caravan Services is located at 101 Connaught Street, Sandgate QLD 4017. We assist towing customers from Brisbane Northside, Moreton Bay, Redcliffe, North Lakes, Brendale, Caboolture and surrounding areas.
When requesting a quote, include the tow vehicle details, caravan details and any controller or towing equipment already fitted.
Braking Feels Jerky or Inconsistent?
The issue may be controller setup, wiring, brake adjustment or the caravan brakes themselves. Tell us what you are experiencing and we can help identify the right next step.
Electric Brake Controller FAQs
What does an electric brake controller do?
It controls the electrical signal sent from the tow vehicle to compatible caravan or trailer electric brakes, allowing braking output to be adjusted and coordinated with the tow vehicle.
What is a proportional brake controller?
A proportional controller uses vehicle deceleration information to vary trailer braking in relation to the tow vehicle’s braking effort.
Can you install a brake controller in any vehicle?
Many vehicles can accept a suitable controller, but installation requirements vary with the vehicle’s electronics, factory towing package and approved controller options.
Why do my caravan brakes feel jerky?
Possible causes include controller gain, boost settings, wiring, brake adjustment, worn magnets, drum condition or other caravan-side brake faults.
Can you check the caravan brakes as well?
Yes. If braking performance is poor, we can discuss caravan brake inspection and servicing as well as the tow-vehicle controller.
Can the controller be installed with a towbar?
Yes. Towbar, trailer plug, brake control and auxiliary wiring can often be planned together as one towing setup.
Do brake controller settings stay the same all the time?
Settings may need adjustment for caravan load, road conditions, controller type and braking response. Follow the fitted controller’s instructions and adjust only when safe to do so.
Where do you install electric brake controllers in Brisbane?
AllBrand Caravan Services installs electric brake controllers from 101 Connaught Street, Sandgate QLD 4017 on Brisbane’s northside.
Get the Brake Controller and Caravan Brakes Working Together
Send us the tow vehicle and caravan details and let us know what towing equipment is already fitted. We can help plan the appropriate controller installation and related brake checks.